%20(1).jpg)
Lancom 1711 Vpn Firmware Download
Download ->>> https://urlca.com/2tvQAg
How to Download and Install Lancom 1711 Vpn Firmware
Lancom 1711 Vpn is a router and VPN gateway that offers secure and reliable connectivity for small and medium-sized businesses. It supports up to 5 VPN tunnels, firewall protection, QoS, VLAN, and IPv6. To ensure optimal performance and security, it is important to keep the firmware of your Lancom 1711 Vpn up to date.
In this article, we will show you how to download and install the latest firmware for your Lancom 1711 Vpn device. Follow these steps carefully to avoid any errors or issues during the process.
Step 1: Check your current firmware version
Before you download and install the new firmware, you need to check your current firmware version. To do this, log in to your Lancom 1711 Vpn web interface using your browser. The default IP address is 192.168.178.1 and the default username and password are admin and admin.
Once you are logged in, go to Setup > System > Status and look for the Firmware version field. Note down the firmware version number and compare it with the latest version available on the Lancom website.
Step 2: Download the latest firmware
If your firmware version is outdated, you need to download the latest firmware from the Lancom website. To do this, go to https://my.lancom-systems.com/downloads/ [^1^] [^2^] and select Router / VPN-Gateways from the Product Type dropdown menu.
Then, find your Lancom 1711 Vpn device from the list of current devices and click on the Download button next to it. You will be redirected to a page where you can choose the firmware version you want to download. We recommend choosing the latest stable version for your device.
Click on the Download button again and save the firmware file (.bin) to your computer. Make sure you do not rename or modify the file in any way.
Step 3: Install the new firmware
After you have downloaded the firmware file, you need to install it on your Lancom 1711 Vpn device. To do this, log in to your Lancom 1711 Vpn web interface again using your browser. Go to Maintenance > Firmware update and click on the Browse button.
Locate the firmware file (.bin) that you downloaded earlier and select it. Then, click on the Upload button to start the firmware update process. Do not turn off or disconnect your device during this process as it may cause damage or malfunction.
The firmware update process may take several minutes to complete. You will see a progress bar and a message indicating when the update is finished. After that, your device will reboot automatically and apply the new firmware settings.
Step 4: Verify the new firmware
After your device has rebooted, log in to your Lancom 1711 Vpn web interface again using your browser. Go to Setup > System > Status and check if the Firmware version field matches the firmware version that you downloaded earlier. If it does, congratulations! You have successfully updated your Lancom 1711 Vpn firmware.
If not, you may need to repeat the firmware update process or contact Lancom support for assistance.
Conclusion
In this article, we have shown you how to download and install the latest firmware for your Lancom 1711 Vpn device. Updating your firmware regularly can improve your device's performance, security, and compatibility with new features and standards. We hope this guide was helpful and easy to follow.
If you have any questions or feedback, please leave a comment below or contact us at support@lan aa16f39245